Step-by-Step Monthly Maintenance Checklist
Step 1: Check Dust Bag Status
-
Monitor via App: Open the app and go to the Consumables & Parts menu to check the fill level and remaining lifespan of your dust bag and accessories.
-
Replace When Full: Swap out the auto-empty base dust bag as soon as it reaches capacity to prevent clogs and maintain optimal suction.

Step 2: Clean the Main Roller Brush
-
Remove the Brush: Turn the robot over and detach the main brush cover and roller.
-
Clear Hair & Tangles: Pull out trapped hair, carpet fibers, and debris wrapped around the main body and side bearings of the brush.

Step 3: Clean the Wheels
-
Inspect Axles: Remove any wrapped hair or lint from the front caster wheel and main driving wheel axles.
-
Check Rotation: Manually spin all wheels to ensure they rotate smoothly without resistance.
Step 4: Clean the HEPA Filter
-
Tap Off Dust: Remove the HEPA filter from the dustbin and gently tap it against a trash can to shake loose fine dust particles.
-
Replace Regularly: Replace the HEPA filter every 3 to 6 months to maintain high filtration efficiency and clean exhaust air.

Step 5: Wipe Body & Sensors
-
Clean Outer Shell: Use a dry or slightly damp soft cloth to wipe dust off the robot's exterior.
-
Wipe Sensors & Contacts: Carefully wipe the anti-drop cliff sensors, wall sensors, laser dome, and metal charging contacts on both the robot and base station to ensure flawless docking and navigation.

Step 6: Stock Up on Spare Consumables
-
Inventory Parts: Keep a spare stash of essential replacement parts at home, including extra dust bags, HEPA filters, side brushes, and mop pads.
-
Restock Early: Reorder replacement kits before your current accessories reach the end of their lifespan so your cleaning routine is never interrupted.

Recommended Maintenance Schedule
| Component | Cleaning Frequency | Replacement Frequency |
| Dust Bag | Check monthly via app | Every 1–2 months (or when full) |
| Main Roller Brush | Monthly | Every 6–12 months |
| HEPA Filter | Monthly (tap clean) | Every 3–6 months |
| Wheels & Axles | Monthly | As needed |
| Sensors & Contacts | Monthly | N/A |
Need genuine replacement parts for your MONSGA MR7 Pro?
Shop MONSGA Official Consumables & Accessories or reach out to our team at the MONSGA Help Center for personalized support!
